Found 1514 Pc Diagnostic Products.
A Unique Patented
Product To Protect The Safety Of You And Your Love Ones!
"Theft Proof! No More Stolen Tire Valve Caps!"
==>Tell Me More
Note:If your system is iOS ,The WIFI OBD scan only support iOS 5.1.1 or later. Multi-Protocol Support: ISO9141-2(5 baud init,10.4Kbaud) ISO14230-4 KWP(5 baud init,10.4 Kbaud) ISO14230-4 KWP(fast init,10.4 Kbaud) ISO15765-4 CAN(11bit ID,500 Kbaud) ISO15765-4 CAN(29bit ID,500 Kbaud) ISO15765-4 CAN(11bit ID,250 Kbaud) ISO15765-4 CAN(29bit ID,250 Kbaud) SAE J1939 CAN(29bit ID,250*Kbaud) USER1 CAN(11*bit ID,125*Kbaud) USER2 CAN(11*bit ID,50*kbaud) Functions: 1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2.Clear trouble codes and turn off the MIL ('Check Engine' light) 3.Display current sensor data 4.Engine RPM 5.Coolant Temperature 6.Calculated Load Value 7.Vehicle Speed 8.Fuel System Status 9.Short Term Fuel Trim 10.Long Term Fuel Trim 11.Intake Manifold Pressure Compatible App There are a lot of software available such as "DashCommand", you can purchase them from Apple store. There are also free software such as "OBD Car Doctor "so you don't have to purchase any if you don't want to. Such as the "DashCommand" APP for $9.99
Features: 100% Brand New. Brand: Coocheer Material: ABS Color: Black Size: show in the picture Model: CH-361 Working Current: 85mA Standby Current: 80mA Operating voltage: 12V(Over-voltage Protection/ Short Circuit Protection) Working Voltage: 9-16 V Power: 1-2 W Frequency: 2.4G HZ Port: 38400 Output Interface: WIFI Output Protocol: RS232 LED Light: OBD Transmitter/Receiver； RS232 Transmitter/Receiver； Power on/off Suitable for: Windows XP，Windows 7/8, Android, IOS, Symbian, PPC, etc Package Content: 1 x Wifi OBD Car Doctor Vehicle Speed: RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim
Tool works for both engines oil pressure and transmission fluid pressure Kit come complete with adapters for most engine and transmission applications. Features and benefits: # 2-1/2" (80mm) Diameter Pressure Gauge calibrated in PSI or bar with protective rubber boot # 50" (1300MM) Heavy Duty Professional Quality Hose with hot surface protectors # Pressure held gauge with quick release (release pressure) Supplied in a case complete with steel adapters, seals and fittings. Range 0-10 bar. * Adapter R 1/8" 2999 * Adapter 1/8" x 27 NPT * Adapter 1/4" x 18 NPT * Adapter 3/8" x 20 UNF * Adapter 1/2" x 20 UNF * Adapter M10 x 1 * Adapter M12 x 1.5 * Adapter M14 x 1.5 * Adapter M16 x 1.5 * Adapter M18 x 1.5 * Manometer + tube + straight connector * 90° elbow connector * Spare O- Rings
100% brand new.
Display current sensor data, including:
Calculated Load Value
Fuel System Status
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Support OBD-II protocols as follows:
Works on all OBD2 Vehicles (from 1996 in USA) and EOBD vehicles (Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)
Compatible with Android Torque and Windows Smartphone, Windows PC.
1 * ELM327 unit (Bluetooth version)
1 * CD software
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ('Check Engine' light)
3.Display current sensor data
5.Calculated Load Value
7.Fuel System Status
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
13. Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
This next set of instructions is for users who are utilizing the Driver CD. The product came with (recommended) alongside with their laptop's bluetooth 1. Install Elm327 bluetooth software Install CD into laptop computer and install the recommended software :scantool_net113win. If this software is not to your liking or not working correctly, your welcome to try any of the others. 2. Locate the diagnostic connector Introduction The 16-pin D-shaped diagnostic link connector (DLC) should be located in the passenger or driver's compartment in the area bounded by the driver's end of the instrument panelto 300 mm (~1 ft) beyond the vehicle centerline,attached to the instrument panel and easy to access from the driver's seat. The preferred location is between the steering column and the vehicle centerline. 3. Connect scan tool to the DLC **Watch the lights on the scan tool as you are performing step B.Both sets of Tx/Rx lights will be lit up in sequence from left to right. The "Power" light should also continuously alternate between red and yellow.
How to see if your vehicle is comliant with OBD II? Please pop the hood and look for a sticker named "VEHICLE EMISSION CONTORL INFORMATION". Protocols: ISO 9141 ISO 11898(aka. CAN) ISO 14230(aka. KWP2000) ISO 15765(aka. CAN) SAE J1939 Following are some of the parameters which could be read from the vehicle. Vehicle Speed RPM Fuel Consumption* Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim *note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer's implementation. Where can I get the software? You can log on to the apple application store to get your commercial software, such as Dynolicious. And There is a software in the CD-ROM comes along with the device. You can use this piece of software to config and test the WI-FI OBD AUTO CHECKER. Specifications: Operating temperature: -15 to 100 Deg Celsius SSID: WiFiOBD IP: 192.168.0.10 Subnet: 255.255.255.0 Port: 35000 Range: 50 ft (Line of sight) Antenna: Internal Power Consumption: 0.75 Watts (With Power Switch) Wifi Standard: 802.11a/b/g Item size: 9 * 5 * 3cm (3.5 * 2.0 * 1.2in) Item weight: 75g/2.6oz Item Includes: 1 * Wi-Fi ELM 327 1 * CD with software
0.Automatic 1.SAE J1850 PWM(41.6Kbaud) 2.SAE J1850 VPW(10.4Kbaud) 3.ISO9141-2(5 baud init,10.4Kbaud) 4.ISO14230-4 KWP(5 baud init,10.4 Kbaud) 5.ISO14230-4 KWP(fast init,10.4 Kbaud) 6.ISO15765-4 CAN(11bit ID,500 Kbaud) 7.ISO15765-4 CAN(29bit ID,500 Kbaud) 8.ISO15765-4 CAN(11bit ID,250 Kbaud) 9.ISO15765-4 CAN(29bit ID,250 Kbaud) A.SAE J1939 CAN(29bit ID,250*Kbaud) B.USER1 CAN(11*bit ID,125*Kbaud) C.USER2 CAN(11*bit ID,50*kbaud) *default settings(user adjustable) The type of support: 1.Works with all OBD-II compliant vehicles 2.Wireless (Bluetooth) 5~10 meter 3.iCar(Bluetooth version) support for software applications for Palm, PDA,Mobile(Andrews,java,blackmerry,etc) Please note: This is the wifi verson,only connect on WiFI.If you need a Bluetooth version, please buy from our other links. Package Include: 1x Newest Original Vgate iCar2 Wifi 1x CD drive
PC-Based Car Diagnostic Cable Code Reader Live Data Scan Tool For Volvo Serial Features: Supports Volvo FCR version 1.3 or older Precision-molded diagnostic connector made to fit all volvo vehicles, even those with "tight" trim around diagnostic socket LED light indicating communication status High quality UL certified Serial Cables (equivalent to CE) Built-in, Electronic Protection from the "Aftermarket Radio Problem" This interface (adapter) is used as an interface and an Serial cable to connect a volvo vehicle to a PC for on-board diagnostics (OBD). It is fully compatible with the diagnostic software version 1.3 from Volvo FCR. Volvo FCR is a software program that turns your PC into a sophisticated Volvo diagnostic tool. Supported Software: OnBoardDiagnostics Versions: 1.3 Volvo FCR Communication Interfaces to connect a Volvo Vehicle to a PC Package Included: 1 X VOLVO Serial Cable 1 X CD Drive
This diagnostic motherboard card (PC analyzer/POST card) is a power on self test device that will provide you with an error code. Once you get this error code, you will use the table in the user manual to determine the problem with your motherboard.